|
1.Zhang SF, Zhang WC, Wang PY, et al. Simulation of Material Removal Process in EDM with Composite Tools[J]. Advances In Materials Science And Engineering, 2019, ID1321780（SCI收录）
2. Shengfang Zhang, Jian Yin, Yu Liu*, et al. Multi-objective Structure Topology Optimization of Wind Turbine Brake Pads Considering Thermal-Structural Coupling and Brake Vibration[J]. Mathematical Problems in Engineering, 2018: 1-10（SCI收录）
3. Zhang SF, Yin J, Liu Y* , et al. Thermal-structural coupling analysis of brake friction pair based on the displacement gradient circulation method[J]. Advances In Mechanical Engineering, 2018, 10(5): 1-13（SCI收录）
4. Zhang SF, Zhang WC, Liu Y, et al. Study on the Gap Flow Simulation in EDM Small Hole Machining with Ti Alloy. Advances In Materials Science And Engineering, 2017, ID8408793（SCI收录）
5. Shengfang Zhang, Jian Yin, Yu Liu*, et al. Structure Topology Optimization of Brake Pad in Large-megawatt Wind Turbine Brake Considering Thermal- structural Coupling[C]. International Conference on Mechanical Engineering and Automation Science, 2016（EI收录）
6. Zhang S，Xin P, Yin J, et al. Friction-thermal-vibration Coupling Analysis of Large-megawatt Wind Turbine Brake. IOP Conference Series: Materials Science and Engineering, 2018, 470(1), ID012037（EI收录）
7. Zhang S，Xue C, Yin J, et al. Multi-body Dynamic Analysis of the Braking Process for Megawatt Wind Turbine Disc Brake. IOP Conference Series: Materials Science and Engineering, 2018, 470(1), ID012005（EI收录）
8. Zhang S，Hao Q, Sha Z, et al. Simulation Study on the Influence Law of Two-body Wear in Sliding Guide Ways. IOP Conference Series: Materials Science and Engineering, 2018, 470(1), ID 012021（EI收录）
9. Zhang SF, Hao Q , Sha ZH, et al. Study on Abrasive Wear of Brake Pad in the Large-megawatt Wind Turbine Brake Based on Deform Software. IOP Conference Series-Materials Science and Engineering, 2017, 280, ID012010（EI收录）
10. Shengfang Zhang*, Yi Wang, Junfeng Mao, Weiguo Wang and Zhihua Sha. Research on NC System of Flame Cutting Machine Based on Trio Motion Control Card, Materials Science Forum, 2013, 723, 286-290（EI收录）
11. 张生芳, 金路, 刘宇, 等. 风电盘式制动器制动闸片磨粒磨损仿真分析[J]. 大连交通大学学报, 2018, 39(2): 53-59.
12. 张生芳, 王豪华, 马付建, 等. 螺纹铣削切削力有限元分析及试验[J]. 工具技术, 2016, 50(8):23-27.
13. 张生芳, 邢志超, 马付建, 等. 基于电流搜索与锁相技术的超声碎石电源频率扫描/跟踪[J]. 大连交通大学学报, 2016, 37(1):101-104.
14. 张生芳, 彭彪, 马付建, 等. 螺旋铣孔末端执行器控制系统研究[J]. 机床与液压, 2015, 43(13).
|
